Capital Services' Epoxies and Expansion Joint Systems - Manufacturer of expansion joints, (Evazote and MetaZeal) for parking garages, bridges and water treatment plants. Capital Services also offers a full line of epoxy injection equipment and elastomeric concretes. MetaZeal® and EVAZOTE provide a waterproof expansion joint over a wide movement range. This is particularly valuable where maximum movement and extreme distortion capabilities are required. While these materials have a working range of 60% compression and 30% tension, they may be subjected to higher movement parameters for limited periods of time. Our line of elastomeric concretes may be used with or without armor in high stress areas such as bridges, parking decks and other commercial structures where a non-shrink, energy absorbing, flexible, waterproof end-dam is required. With outstanding wear resistance, it has been designed to combat the toughest of conditions Our Easy-1 machine will surprise you with its ease of operation. This user-friendly machine does not require a compressor and many of the replacement parts may be obtained through local suppliers. Best of all, this injection machine will do it all at a fraction of the cost of those other for more expensive machines. Our Easy-1 CJ pumps both epoxies and polyureas, making this the machine for contractors who require convenience as well as efficiency. The Easy-1 CJ can pump up to 3000 feet of joint material per hour (based on 1/8" x 1/2" joint opening). It will pump material from bulk at your desired ratio, at a steady flow, mixes and dispenses the material easily and conveniently.